Spot clean.
To heat apply the patch, please follow the below instructions.
A. Heat iron to cotton setting.
B. Place end use product on a flat, hard, dry surface.
C. Position patch in desired location. Please do not put over a seam or other raised area.
D. Cover a thin piece of cotton or other fabric that will not melt on top of patch.
E. Place iron over patch and press down with firm pressure using both hands for 30 seconds. Do NOT use steam. NO back and forth motion of iron.
F. Turn garment inside-out and iron the back of the patch for 40 seconds with firm pressure.
G. Remove fabric and gently feel edges of patch, but only when the patch is completely cold to make sure they are adhered well.
H. If there is slight thing up of patch, please repeat steps D and F. Remember to place thin cotton/other fabric on top of backside of patch.
I. Please note that the heat seal application cannot be used on waterproof fabric or material made of plastic.
Iron-on patches are not compatible with metallic gear.

Iron-On Patches