Heat iron to cotton setting.
Place end use product on a flat, hard, dry surface.
Position patch in desired location. Please do not put over a seam or other raised area.
Cover a thin piece of cotton or other fabric that will not melt on top of patch.
Place iron over patch and press down with firm pressure using both hands for 30 seconds. Do NOT use steam, NO back-and-forth motion of iron.
Turn product inside-out and iron the back of the patch for 40 seconds with firm pressure.
Remove fabric and gently feel edges of patch, but only when the patch is completely cold, to make sure they are adhered well.
If there is slight lifting up of patch, please repeat steps. Remember to place thin cotton/other fabric on top backside of patch.
Please note that the heat seal application cannot be used on waterproof fabrics or material made of plastic.
Iron-on patches are not compatible with metallic gear.

Open Box: Colby Solid Backpack, Small - Blush