Heat iron to cotton setting.
Place end use product on a flat, hard, dry surface.
Position patch in desired location. Please do not put over a seam or other raised area.
Cover a thin piece of cotton or other fabric that will not melt on top of patch.
Place iron over patch and press down with firm pressure using both hands for 30 seconds. Do NOT use steam, NO back-and-forth motion of iron.
Turn product inside-out and iron the back of the patch for 40 seconds with firm pressure.
Remove fabric and gently feel edges of patch, but only when the patch is completely cold, to make sure they are adhered well.
If there is slight lifting up of patch, please repeat steps. Remember to place thin cotton/other fabric on top backside of patch.
Please note that the heat seal application cannot be used on waterproof fabrics or material made of plastic.

This item must be thoroughly washed before use. Preheat or precool your bottle with hot or cold water before filling with the desire beverage.
This item is dishwasher safe.
This item is NOT microwave safe.
Do not use with liquids that are warmer than 100° F (38° C).
Do not use this bottle with carbonated drinks, as it may cause the drinking spout to forcefully eject.
To prevent scolding, always pour hot beverages slowly into a cup and do not drink directly from the bottle.
Do not completely fill the bottle. Overfilling the bottle can interfere with the tightness of the drinking spout causing the contents to leak/spill on the user.
Pleasure ensure bottle is in upright position before pressing the button to open the lid.
After, use leave the bottle in upright position for 2-3 seconds before closing lid. Residual beverage content may remain in the drinking spout, causing leakage.
To prevent dents and maintain stable heat retention, do not drop or knock against hard objects. It will dent and degrade the interior vacuum (heat retention efficiency).
To avoid any leakage of bottle contents, make sure the silicone panel is pushed back firmly in place underneath and on top of the spout and air vent.
Iron-on patches are not compatible with metallic gear.

Forest Colby Backpack & Lunch Bundle, Set of 3