Lullaby Swivel Glider & Ottoman

LULLABY SWIVEL GLIDER, OTTOMAN & RECLINER

DIMENSIONS:
Swivel Glider: 35" x 33" x 34" h
Seat Cushion: 22" x 20" x 6" thick (no separate side or back cushions)
Seat Height: 19" h
Back Height: 22"
Arm Width: 6.5" w
Glider Base: 30" diam
Weight: 95 lbs

Ottoman: 22" x 22" x 16.5"
Weight: 25 lbs

Recliner (up): 36" x 38" x 34"
Recliner (fully reclined): 36" x 55" x 31"
Back: 27" x 13" x 18"
Seat Cushion: 22" x 23" x 7"
Seat Height to Floor: 21" h
Arm Width: 8.5" w
Arm Height from Floor: 24" h
Pitch of back (up): 6"
Pitch of back (fully reclined): 10"

COMPOSITION:
Frame: Kiln-dried Alder Frame

Kiln-drying reduces the moisture content of the hardwood frames and helps prevent warping, cracking and mildew.
Frames are padded with cotton/foam/polyester for extra comfort.
Double-dowel joinery adds strength and integrity where the frame components meet.

Corner blocks are triangular wooden braces attached to the under parts of the frame that add additional support.
Frames are also glued, screwed and stapled.

Springs: Steel Sinuous (Zig Zag)
Sinuous springs are high-gauge steel "S"-shaped bands that are stretched across the frames from front to back and clipped into place.
They provide a solid and comfortable base.
Springs are doubled up at the ends of the seat providing additional support where it is most needed.

Cushions:
Down: First, we insert our premium foam core in a zippered 200 thread count channel cotton cover. For the perfect seat, we carefully blend the duck down with feathers for luxurious comfort. The blend is balanced at 90% feather and 10% duck down and is hypo-allergenic.

Recline Mechanism (Recliner only):
Glider has an easy open-and-close pull handle release, for a comfortable recline. Infinite position balance in the recline position.
Wide stance allows for side-to-side stability

Poly: Our standard hypo-allergenic poly cushion is an eco-friendly, high-density and high-resiliency foam core, that is then wrapped in thick layers of fiber.

Fabrics:
Checker, Poppy: 56% Linen, 44% Cotton
Classic Stripe, Maxi Stripe: 100% Acrylic
Linen: 100% Linen
Maxi Dot: 58% Cotton and 42% Linen
Damask, Crosscheck: 55% Linen, 45% Cotton
Floral Butterfly: 51% Cotton, 49% Linen
Floral Silhouette: 58% Cotton, 42% Linen
Oxford Stripe: 85% Cotton, 15% Polyester
Mini Stripe: 60% Cotton, 34% Polyester
Big Beads: 100% Polyolefin
Twill, Brushed Twill, Denim, Chenille, Ribbon Stripe, Polka Dot, Matelasse, Small Basketweave, Wallpaper Floral, Wild Monkey, Houndstooth, Ribbons: 100% Cotton
Everydaysuede: 100% Polyester Face, 70% Cotton, 30% Polyester Backing
Leather: 100% Leather with Polyurethane Coat
Streetwise: 61% Rayon, 39% Polyester
Herringbone: 64% Rayon, 21% Cotton, 15% Bamboo

CARE:
All fabrics
Avoid direct heat and sunlight
Lightly brush and vacuum regularly

Twill, Brushed Twill, Denim, Big Beads, Everydaysuede, Organic Basketweave, Diamond Matelasse: Machine Washable. Dry cleaning recommended

Machine wash cold gentle cycle in a commercial washer (without an agitator). Non-chlorine bleach as needed. Tumble-dry low to medium in a commercial dryer for approx. 30–40 minutes. During drying, open dryer and pull fabric apart to ensure the center dries. Remove when slightly damp and return to furniture. Warm iron as needed. Any wrinkles will smooth out naturally. Do not line dry; weight of wet fabric may cause pulling or stretching. We recommend professional laundering. Clean all pieces simultaneously to prevent any color variances.

Twill with Contrast Piping, Checker, Mini Stripe, Maxi Stripe, Maxi Dot, Chenille, Ribbon Stripe, Polka Dot, Dot Matelasse, Basketweave, Oxford Stripe, Tailored Stripe, Harbor Stripe, Florentine, English Floral: Dry Clean Only

Leather: Professional Leather Cleaning only.

SLIPCOVER INSTALLATION:
Carefully pull your new slipcover over the frame in a front-to-back direction. Smooth and tuck any excess fabric into the corners and sides of the seat deck. Once on, gently work the slipcover so that so that the zippers are aligned with the corners of the frame. The slipcover will fit snugly yet retain its relaxed look.

Gently slide on the cushion covers, making sure that the corners of the cushion fill the corners of the slipcover before zipping.

For loose back cushions or side pillows, fold in half when filling slipcovers. Gently work the pillows in the slipcover. Zip the slipcovers.

For a Sleeper Sofa, follow the above steps. Then arrange the slipcover onto the sleeper so that the flap (''trapdoor'') lies along the frame of the enclosed bed frame under the seat section. The slipcover ties (or Velcro) found on the flap should be tied to the sleeper mechanism to hold the flap in place. When folding out the sleeper, undo the ties and fold the flap down the front of the sleeper. For convenience, the slipcover can remain on the sleeper while using the sleeper mechanism.