Eco Glider & Ottoman

ECO GLIDER

DIMENSIONS:
Glider Overall: 37.5"w x 36"l x 37.5"h
Diagonal Depth: 33"
Seat: 21"w x 19.5"d x19.5"h
Seat Height from floor: 19.5"h
Back Height: 32"h
Seat Back Height: 20.5"h
Arm: 8"w x 33"d
Arm Height from floor: 25"h
Clearance to floor: 5"
Rockers: 2"w x 37.5"l x 2.5"h
Seat Cushion: 27.5"w x 21.5"l x 5"thick
Back Cushion: 21.5"w x 30.5"h x 4"thick
Weight: 55lbs

Ottoman Overall: 24.5"w x 19.5"l x18"h
Weight: 25lbs

COMPOSITION:
Frame:
Kiln drying reduces the moisture content of the SFI (Sustainable Forestry Initiative) Certified hardwood frames and helps prevent warping, cracking and mildew.
Mortise-and-tenon joinery adds strength and integrity where the frame components meet.
Corner blocks are triangular wooden braces attached to the undersides of the frame's corners for additional stability.
Frames are also glued and stapled.
Seat deck, back frame and arm frames are covered in 100% cotton.
Packaging materials include a recycled cardboard tray and paper protective sheeting.
Made in the USA.

Legs:
A round metal glider base made of 80% recycled material is bolted to the frame's hardwood rails. Base swivels 360 degrees.

Springs:
Sinuous springs are high-gauge steel "S"-shaped bands that are stretched across the frames from front to back and clipped into place.
They are constructed using 70% recycled steel and wrapped to prevent squeaking. providing a solid and comfortable base.

Cushions:
Poly-wrapped seat cushions have high-density foam cores that retain their shape over time.
The foam core centers are created using 20% soy-based foam.
Seat cushion wrap is made of up to 40% recycled material.
Back cushion wrap is made from 100% recycled drink bottles.

Lining:
Made with 100% organic cotton fibers

Ottoman
Filled with 40% recycled fiber. Ottoman is stationary.

Slipcovers:
Twill, Brushed Twill: 100% Cotton
Organic Basketweave: 100% Organic Cotton Fibers

CARE:
All fabrics
Avoid direct heat and sunlight
Lightly brush and vacuum regularly

Twill, Brushed Twill, Organic Basketweave: Machine Washable. Dry cleaning recommended

Machine wash cold gentle cycle in a commercial washer (without an agitator). Non-chlorine bleach as needed. Tumble-dry low to medium in a commercial dryer for approx. 30–40 minutes. During drying, open dryer and pull fabric apart to ensure the center dries. Remove when slightly damp and return to furniture. Warm iron as needed. Any wrinkles will smooth out naturally. Do not line dry; weight of wet fabric may cause pulling or stretching. We recommend professional laundering. Clean all pieces simultaneously to prevent any color variances.

SLIPCOVER INSTALLATION:
Carefully pull your new slipcover over the frame in a front-to-back direction. Smooth and tuck any excess fabric into the corners and sides of the seat deck. Once on, gently work the slipcover so that so that the zippers are aligned with the corners of the frame. The slipcover will fit snugly yet retain its relaxed look.

Gently slide on the cushion covers, making sure that the corners of the cushion fill the corners of the slipcover before zipping.

For loose back cushions or side pillows, fold in half when filling slipcovers. Gently work the pillows in the slipcover. Zip the slipcovers.

For a Sleeper Sofa, follow the above steps. Then arrange the slipcover onto the sleeper so that the flap (''trapdoor'') lies along the frame of the enclosed bed frame under the seat section. The slipcover ties (or Velcro) found on the flap should be tied to the sleeper mechanism to hold the flap in place. When folding out the sleeper, undo the ties and fold the flap down the front of the sleeper. For convenience, the slipcover can remain on the sleeper while using the sleeper mechanism.